Selecting An Ice Fishing Auger – 3 Points To Keep In Mind
For the older and ice fishing buffs it is probably an unknown condition to use an ice fishing auger. However, the newer lot of anglers would never have had to go through the cumbersome effort of boring a gap in the ice to catch your fish through. The new very powerful ice fishing augers which are compact and lightweight save you from the arduous task of working on chipping a hole in the ice for hours. These ice fishing augers make your life so much more comfortable now.
The various styles of ice fishing augers in the market
The kind of ice fishing auger that you will need depends on the kind of drilling that you have to do on every trip of yours. There are several different types available in the market, with varied power, size and models. Some who are out fishing in the ice may want only a few holes to be drilled in a day whereas others may need several, this is so especially if they are moving along with a school of fish that is feeding. So if you require an auger with a high power and with more fuel usage you would need to drill at a faster pace.
The different apparatus that must be considered when selecting an ice fishing auger should take account of:
1. Gas or electric powered – it is preferable to use gas powered augers as it easier to shift them on the ice and you do not have to bring a power supply source with you, such as a battery. You would of course need oil and gasoline or make sure that you have filled the auger up before you leave for the lake. With no polluting emissions, the Electric augers are thought to be more eco-friendly. The ice fishing augers that are gas powered are more effective than those that are operated with a battery and are more competent for drilling through ice especially if it is extending beyond a depth of over three to four feet. There is not much variation in performance for a thinner layer of ice.
2. Gear ratio – To control the speed of the electric ice drill the gear ratios are used. This is a safety factor of the ice fishing auger which will allow the user to control the speed of the drill which is a vital safety factor. Another important factor is to keep the gear compilation easily reachable to keep it well maintained even when the weather is cold.
3. The drill size – drills are normally not more than ten inches, but usually within 6 to 8 inches only. The size of the hole that you are planning to drill in the ice will have to be considered if you are thinking of using a tip up or on jigging. If you need a bigger sized drill this is usually found with ice fishing augers that are gas powered.
You can also have manual ice fishing by using a revolving shaft to assist in providing the twisting action and slicing energy for the auger. The manual augers which are the cheapest to procure are also the most environment friendly ones and also much lighter in weight than the others.